Stator Pick–Up Pulsar Coil For Polaris 400 cc Big Boss Sportsman Xplorer Xpress

Stator Pick-Up Pulsar Coil For Polaris 400 cc Big Boss Sportsman Xplorer Xpress

• We offer a brand new pickup/pulser coil for you to repair your stator.
• Often unavailable from the OEM manufacture
• One year limited warranty
• All products shipped are tested

*All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

Fits Models 

• Polaris 400 L 1995 -1995
• 400 L 2×4 1994 -1994
• 400 L 4×4 1994 -1994
• Big Boss 400 L 1994 -1997
• Sport 400 L 1995 -1995
• Sportsman 400 1994 -1996
• Xplorer 400 1995 -1997
• Xplorer 400 1999 -2002
• Xplorer 400  4×4 1999 -2001
• Xplorer 400 L 1996 -1997
• Xplorer 400L 1998 -1998
• Xpress 400 L 1996 -1997
• Polaris 600 XCR Carb L/C 1994 -1996
• XC 600 Carb L/C 1997 -1997
• XLT 580 Carb L/C 1993 -1994
• XLT 580 SKS Carb L/C 1993 -1994
• XLT 580 SP Carb L/C 1993 -1994
• XLT 580 SP XTRA Carb L/C 1994 -1994
• XLT 600 Carb L/C 1995 -1997
• XLT 600 LTD Carb L/C 1997 -1997
• XLT 600 RMK Carb L/C 1996 -1997
• XLT 600 SKS Carb L/C 1995 -1997
• XLT 600 SP Carb L/C 1995 -1997
• XLT 600 Touring 1995 -1996
• XLT 600 Touring Carb L/C 1997 -1997

Replaces OEM

• 3084763
• 3084511

Technical Details

Dimensions:
Height: 22mm
Length: 22mm
Width: 18mm
Bracket center to center: 30 mm
Length of wires: 400mm

Other Specifications:
Number of wires : 2
Number of terminals: 2

Wire to Wire Resistance:
Red/White to White = 130 ohms+/-20%

Not following these instructions may result in damaging the part or other components on your vehicle.

• By using a small soldering iron weld the wires to the ones on your OEM wiring harness.
• Insulate your solders with heat shrink.
• Before attempting to start your vehicle, adjusting the air gap is necessary for certain models.
• Rotate the fly wheel by hand so the raised node is lined up with the pick up /pulsar coil and adjust as close as possible, but no less than 0.010’’.
• If no spark or erratic spark, switch the wires at the plug.

Part Application/Fitment

Interchanges/Cross References