Stator For Yamaha | YFM 250 Bear Tracker Bruin | 2001–2009

Stator For Yamaha | YFM 250 Bear Tracker Bruin | 2001-2009

• Quality Product
• Made with premium materials

Don’t forget your Stator Cover Gasket RM08004 & <>RM08021– the perfect match for your new stator!

Fits Models

• YAMAHA
  •  YFM 250
  • YFM 660

Replaces OEM

• YAMAHA
  • 1P0-H1410-00-00
  • 4XE-81410-00-00
  • 5LP-81410-00-00
  • 5LP-81410-01-00
  • 5LP-81410-02-00

Technical Details

Dimensions :
Interior diameter : 34mm 
Exterior diameter : 94mm 
Thickness : 13mm 
Length of wires stator to grommet : 155mm 
Length of wires grommet to plug : 220mm 
Length of pickup coil’s wire to grommet : 100mm 

Other specifications :
Number of wires : 7
Number of plugs : 2 
Number of pins : 7

Wire to wire resistance :
Alternator : White between each White = 0.4ohms +/-20%
Pickup : Blue to Green = 450 ohms +/-20%
Source : Black to Red = 0.1 ohms +/-20%

Before installing your new stator:

• Check the AC output of the stator.
• Replace any burned or corroded connectors on stator and regulator/rectifier
• Check and repair any melted wiring.
• Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code then you’re original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010’’.

Part Application/Fitment

Interchanges/Cross References