Stator For Yamaha | Raptor Warrior Wolverine | 2000–2013

Stator For Yamaha | Raptor Warrior Wolverine | 2000-2013

Don’t forget to compliment your new Stator with a brand new Cover Gasket: RM08005 & RM08001

Fits Models

• YFM 350 Big Bear 4×4 2000
• YFM 350 Raptor 2004-2013
• YFM 350 Raptor SE 2005-2007
• YFM 350 Warrior 2002-2004
• YFM 350 Warrior California 2002-2003
• YFM 350 Wolverine 2002-2005
• YFM 400 Big Bear 2000-2012
• YFM 400 Big Bear IRS 2007

Replaces OEM

• 5FU-81410-00-00
• 5NF-81410-00-00

Technical Details

Number of wires : 7
Number of terminals : 7
Alternator : White between each White = 0.4 ohms+/-20%

Before installing your new stator

• Check the AC output of the stator.
• Replace any burned or corroded connectors on stator and regulator/rectifier
• Check and repair any melted wiring.
• Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.

When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010?.

Part Application/Fitment

Interchanges/Cross References