Stator For Polaris Big Boss Magnum Ranger and More 1997–2001

Stator For Polaris Big Boss Magnum Ranger and More 1997-2001

• Quality Product
• Made with premium materials

Fits Models

• Polaris Big Boss 500 1998 -1999
• Int’l Big Boss 2000 -2000
• Int’l Big Boss 500 1999 -1999
• Int’l Big Boss 500 2001 -2001
• Magnum 500 1999 -1999
• Magnum 500 4×4 2000 -2000
• Magnum 500 EB 2000 -2000
• Magnum 500 HDS 4×4 2000 -2000
• Scrambler 500 1997 -2000
• Sportsman 500 1998 -2000
• Sportsman 500 6×6 Carb 2001 -2001
• Worker 500 1999 -1999
• Polaris Ranger 500 6×6 1999 -1999

Replaces OEM

• 3085561
• 3086821

Technical Details

Number of wires : 8
Number of terminals : 11
Alternator : Yellow to Yellow/Red = 0.3 ohms+/-20%
Alternator : Yellow to Ground = O.L ON DISPLAY
Pickup : White to White/Red = 115 ohms+/-20%
Source 1 : Red to Black/Red = 445 ohms+/-20%
Source 2: Red to Green = 4 ohms+/-20%
Before installing your new stator

• Check the AC output of the stator.
• Replace any burned or corroded connectors on stator and regulator/rectifier
• Check and repair any melted wiring.
• Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.

When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010?.

Part Application/Fitment

Interchanges/Cross References