Generator Stator Can–Am Traxter 500 650 cc 1999–2005 ( Traxter Traxter)

Generator Stator Can-Am Traxter 500 650 cc 1999-2005 ( Traxter Traxter)

• You must re-install your original grommet and the new connector (see picture).
• Once your connector and grommet is re-installed, our part becomes a Plug-and-play unit, direct fit, and very easy to install.
• Highest grade lamination materials
• Highest grade copper windings, resistant to 200 degrees Celsius.
• Pick up pulsar coil included
• All product shipped are tested
• One year limited warranty

*All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

Fits Models

• Can-am Traxter 500 1999 -2005
• Can-am Traxter 650 2005 -2005
• Can-am Traxter Max 500 2003 -2005
• Can-am Traxter Max 650 2005 -2005

Replaces OEM 

• 420296321

Minimal Mechanical Experience Required

Technical Details

Number of wires : 5
Number of terminals : 5
Alternator : Yellow Between each Yellow = 0.4 ohms+/-20%
Alternator : Yellow to Ground = O.L. ON DISPLAY
Pick up : Blue to White = 242 ohms+/-20%
Other : Black to Ground = O.L. ON DISPLAY
Before installing your new stator

• Check the AC output of the stator.
• Replace any burned or corroded connectors on stator and regulator/rectifier
• Check and repair any melted wiring.
• Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.

When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010?.

Part Application/Fitment

Interchanges/Cross References