Stator Yamaha YXR 450 Rhino 4×4 2006–2009

Stator Yamaha YXR 450 Rhino 4×4 2006-2009

• Direct replacement to your original unit
• Plug-and-play, direct fit, easy installation.
• Highest grade lamination materials
• Highest grade copper windings, resistant to 200 degrees Celsius.
• Pick up pulsar coil included
• Connector included
• Rubber grommet included
• All product shipped are tested
• One year limited warranty

*All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

Used on

• Yamaha YXR 450 Rhino 2006 -2009

Replaces OEM

• 2P5-81410-00-00

Plug-and-Play / Direct Fit

Technical Details

Number of wires : 7
Number of terminals : 7
Alternator : White between White = 1.4 ohms+/-20%
Pick up coil : Green to Blue = 400 ohms+/-20%
Pick up coil : Blue/White to Red = 2.3 ohms+/-20%
Before installing your new stator

• Check the AC output of the stator.
• Replace any burned or corroded connectors on stator and regulator/rectifier
• Check and repair any melted wiring.
• Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.

When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010?.

Part Application/Fitment

Interchanges/Cross References