Stator / Stator Cover Gasket For Yamaha YFM 350 Warrior Big Bear Moto-4 1988-1989
- Direct replacement to your original unit
- Plug-og-play, direct fit, easy installation.
- Highest grade lamination materials
- Highest grade copper windings, resistant to 200 degrees Celsius.
- Pick up pulsar coil included
- Connector included
- Rubber grommet included
- Gasket included
- All product shipped are tested
- One year limited warranty
Passer til følgende modeller
-
Yamaha
- YFM 350 Warrior Big Bear Moto-4 1988-1989
Tekniske detaljer
Number of wires : 9
Number of terminals : 8
Alternator : White to White = 0.9 ohms+/-20%
Alternator : White between Ground = O.L. ON DISPLAY
Pick up 1 : Blue to Red = 200 ohms+/-20%
Pick up 2 : Orange to White = 200 ohms+/-20% Source 1 : Green to Brown = 315 ohms+/-20%
Before installing your new stator
- Check the AC output of the stator.
- Replace any burned or corroded connectors on stator og regulator/rectifier
- Check og repair any melted wiring.
- Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement og should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010?.
Passer specifikt på disse modeller
| Model |
Delnummer |
År |
Mærke |
Motor |
| YFM 350 Moto-4 |
RM01035G |
1987 |
Yamaha |
|
| YFM 350 Moto-4 |
RM01035G |
1988 |
Yamaha |
|
| YFM 350 Moto-4 |
RM01035G |
1989 |
Yamaha |
|
Erstatter følgende originale varenumre
| Varenummer |
Mærke |
| RM22602-R00 |
Yamaha |
