Stator For Polaris | Magnum Sportsman Worker + Xpedition | 1995–2004

Replacement Stator | Polaris

Also available

Stator Cover Gasket RMS050-103505

Perfect to complement your Stator.

Fits Models

• Magnum 425 2×4 1995-1998
• Magnum 425 4×4 1995-1998
• Magnum 425 6×6 1996-1997
• Ranger 425 2003
• Ranger 500 Series 11 2004
• Sportsman 335 1999-2000
• Sportsman 400 2001-2002
• Sportsman 500 4×4 1996-1997
• Worker 335 1999
• Xpedition 425 2000-2002
• Xplorer 500 1997

Replaces OEM

• 3084974
• 3086860
• 3086239
• 3086232
• 3087141

Technical Details

Number of wires : 9
Number of terminals : 12
Alternator : Yellow to Yellow/Red = 0.5 ohms+/-20%
Pick up 1 : White/Red to White = 115 ohms+/-20%
Source 1 : Black/Red to Red = 450 ohms+/-20%
Source 2 : Red to Green = 4.1 ohms+/-20%

Before installing your new stator

• Check the AC output of the stator.
• Replace any burned or corroded connectors on stator and regulator/rectifier
• Check and repair any melted wiring.
• Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.

When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010?.

Part Application/Fitment

Interchanges/Cross References