Kawasaki KLF 220 Bayou Stator Coil | Replaces 21003–1262

Kawasaki KLF 220 Bayou Stator Coil | Replaces 21003-1262

• Direct replacement to your original unit
• Plug-and-play, direct fit, easy installation.
• Highest grade lamination materials
• Highest grade copper windings, resistant to 200 degrees Celsius.
• Connector included
• Rubber grommet included
• All products shipped are tested
• One year limited warranty

All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

Fits Models

• Kawasaki KLF 220 Bayou 1988 -1995

Replaces OEM

• 21003-1172
• 21003-1262

Technical Details

Dimensions :
Interior diameter : 34mm 
Exterior diameter : 92mm 
Thickness : 18mm 
Length of wires stator to grommet : 100mm 
Length of wires grommet to plug : 150mm & 900mm 

Other specifications :
Number of wires : 4 
Number of plugs : 2 
Number of pins : 4 

Wire to wire resistance :
Alternator : Yellow to Yellow = 0.4ohms +/-20%
Source : Red to Black/Red = 140ohms +/-20%

Before installing your new stator

• Check the AC output of the stator.
• Replace any burned or corroded connectors on stator and regulator/rectifier
• Check and repair any melted wiring.
• Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original. `
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010’’.

Part Application/Fitment

Interchanges/Cross References