Stator Yamaha YFM 350 Big Bear 1987 YFM 350 Warrior 1987

Stator Yamaha YFM 350 Big Bear 1987 YFM 350 Warrior 1987

• Direct replacement to your original unit
• Plug-and-play, direct fit, easy installation.
• Highest grade lamination materials
• Highest grade copper windings, resistant to 200 degrees Celsius.
• Pick up pulsar coil included
• Connector included
• Rubber grommet included
• All product shipped are tested
• One year limited warranty

We have even included the opposite connector (main harness side) as we know these are often melted/corroded/defective and a major cause for repetitive electrical issues.

*All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

Fits Models

• Yamaha YFM 350 Big Bear 1987 -1987
• YFM 350 Big Bear 1989 -1989
• YFM 350 Warrior 1987 -1989

Replaces OEM

• 1UY-85510-20-00
• 2XK-85510-20-00

Technical Details

Number of wires : 9
Number of terminals : 9
Alternator : White to White = 0.9 ohms+/-20%
Alternator : White Between Ground = O.L. ON DISPLAY
Pick up : Blue to Red = 200 ohms+/-20%
Pick up : Orange to White = 200 ohms+/-20%
Source : Green to Brown = 315 ohms+/-20%
Before installing your new stator

• Check the AC output of the stator.
• Replace any burned or corroded connectors on stator and regulator/rectifier
• Check and repair any melted wiring.
• Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.

When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010?.

Part Application/Fitment

Interchanges/Cross References