Stator For Polaris | Magnum Trail Boss Xpedition | 2000–2002

Stator For Polaris | Magnum Trail Boss Xpedition | 2000-2002

Stator Cover Gasket RMS050-103505

Used on

• Polaris Magnum 325 2000 -2002
• Magnum 325 HDS 2000 -2001
• Magnum 325 HDS 2×4 2002 -2002
• Magnum 325 HDS 4×4 2002 -2002
• Trail Boss 325 2000 -2002
• Trail Boss 325 Special Edition 2001 -2001
• Xpedition 325 2000 -2002

Replaces the following OE reference numbers 

• 3086458
• 3086904

Technical Details

Dimensions :
Interior diameter : 41mm 
Exterior diameter : 103mm 
Thickness : 15mm 
Length of wires stator to grommet : 130mm 
Length of wires grommet to plug : 900mm 
Length of pickup coil’s wire to grommet : 235mm 

Other specifications :
Number of wires : 12 
Number of plugs : 9 
Number of pins : 15 

Wire to wire resistance :
Alternator : Yellow to Green= 0.4ohms +/-20%
Pickup : White to White/Red = 510ohms +/-20%
Other : Blue to Red = 0.3ohms +/-20%

Before installing your new stator

• Check the AC output of the stator.
• Replace any burned or corroded connectors on stator and regulator/rectifier
• Check and repair any melted wiring.
• Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original. `
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010’’.

Part Application/Fitment

Interchanges/Cross References