Polaris Outlaw 450S | Outlaw 525 | Outlaw 525 IRS | Outlaw 525 S Stator Coil For

Brand new stator

• Direct replacement to your original unit
• Plug-and-play, direct fit, easy installation.
• Highest grade lamination materials
• Highest grade copper windings, resistant to 200 degrees Celsius.
• Pick up pulsar coil included
• Connector included
• All product shipped are tested
• One year limited warranty

All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

Used on

• Polaris Outlaw 450 2008 -2010
• Outlaw 525 2007 -2011

Replaces OEM

• 4011866

Technical Details

Dimensions:
Interior diameter: 35mm 
Exterior diameter: 90mm 
Thickness: 19mm 
Length of wires stator to grommet: 103mm 
Length of wires grommet to plug: 40mm 
Length of pickup coil’s wire to grommet: 400mm

Other specifications:
Number of wires: 5
Number of plugs: 2
Number of pins: 5

Wire to wire resistance:
Alternator: = 0.4ohms +/-20%
Pickup: = 135ohms =+/-20%

Before installing your new stator

• Check the AC output of the stator.
• Replace any burned or corroded connectors on stator and regulator/rectifier
• Check and repair any melted wiring.
• Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original. `
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010’’.

Part Application/Fitment

Interchanges/Cross References