Honda TRX420 Rancher FA | FPA Generator Stator Replaces 31120–HP7–A01

Honda TRX420 Rancher FA | FPA Generator Stator Replaces 31120-HP7-A01

• Direct replacement to your original unit
• Plug-and-play, direct fit, easy installation.
• Highest grade lamination materials
• Highest grade copper windings, resistant to 200 degrees Celsius.
• Pick up pulsar coil included
• Connector included
• Rubber grommet included
• All products shipped are tested
• One year limited warranty

All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

Fits Models

• Honda TRX 420 Rancher FA 2009 -2014
• TRX 420 Rancher FPA 2009 -2014

Replaces OEM

• 31120-HP7-A00
• 31120-HP7-A01

Technical Details

Dimensions :
Interior diameter : 42mm 
Exterior diameter : 106mm 
Thickness : 20mm 
Length of wires stator to grommet : 100mm 
Length of wires grommet to plug : 250mm 
Length of pickup coil’s wire to grommet : 80mm 

Other specifications :
Number of wires : 5 
Number of plugs : 1 
Number of pins : 5 

Wire to wire resistance :
Alternator : Yellow between each Yellow = 0.4ohms +/-20%
Pickup : Blue to Green = 115ohms +/-20%

Before installing your new stator

• Check the AC output of the stator.
• Replace any burned or corroded connectors on stator and regulator/rectifier
• Check and repair any melted wiring.
• Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original. `
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010’’.

Part Application/Fitment

Interchanges/Cross References