CDI Module For High Performance Polaris Big Boss Magnum Ranger 1995–2004

CDI Module For High Performance Polaris Big Boss Magnum Ranger 1995-2004

• Our part is a Plug-and-play unit, direct fit, and easy to install.
• Original timing curve
• Higher grade of electronic components.
• The Quality exceeds the OEM equipment
• All products shipped are tested
• One year limited warranty

Note: The OEM 3086982 has 2 possible CDI’s for some Polaris models, compare your original part with our product before purchasing

We highly recommend replacing the voltage regulator rectifier at the same time as the CDI unit. It is the reason for CDI failures. These unit are triple tested at the factory to make sure they perform properly.

*All item pictures are accurate, if in doubt do not hesitate and compare our item to your original part.

Fits Models

• Polaris Big Boss 500 1998 -1999
  
• Polaris Int’l Big Boss 2000 -2000
  
• Polaris Int’l Big Boss 2002 -2002
  
• Polaris Int’l Big Boss 500 1999 -1999
  
• Polaris Int’l Big Boss 500 2001 -2001
  
• Polaris Magnum 425 1998 -1998
  
• Polaris Magnum 425 2×4 1995 -1997
  
• Polaris Magnum 425 4×4 1995 -1997
  
• Polaris Magnum 425 6×6 1996 -1997
  
• Polaris Magnum 500 1999 -1999
  
• Polaris Magnum 500 4×4 2000 -2001
  
• Polaris Magnum 500 EB 2000 -2000
  
• Polaris Magnum 500 HDS 2×4 2002 -2002
  
• Polaris Magnum 500 HDS 4×4 2000 -2001
  
• Polaris Magnum 500 HDS 4×4 2003 -2003
  
• Polaris Scrambler 400 2×4 2000 -2000
  
• Polaris Scrambler 500 1997 -2000
  
• Polaris Scrambler 500 2×4 2001 -2002
  
• Polaris Scrambler 500 4×4 2001 -2002
  
• Polaris Sportsman 335 1999 -2000
  
• Polaris Sportsman 400 2001 -2002
  
• Polaris Sportsman 500 1996 -2000
  
• Polaris Sportsman 500 4×4 Carb 2001 -2001
  
• Polaris Sportsman 500 6×6 Carb 2001 -2002
  
• Polaris Worker 335 1999 -1999
  
• Polaris Worker 500 1999 -2000
  
• Polaris Xplorer 400 L 1995 -1995
  
• Polaris Xplorer 500 1997 -1997
  
• Polaris Ranger 425 2003 -2003
  
• Polaris Ranger 500 6×6 1999 -1999
  
• Polaris Ranger 500 Series 10 2×4 2003 -2003
  
• Polaris Ranger 500 Series 10 4×4 2003 -2003
  
• Polaris Ranger 500 Series 10 6×6 2003 -2003
  
• Polaris Ranger 500 Series 11 2004 -2004

Replaces OEM

• 3084691
  
• 3085382
  
• 3085564
  
• 3085639
  
• 3086982

Plug-and-Play / Direct Fit

Previous Product Code
IPO6007 / IPO6003

Please note that CDIs (Capacitor Discharge Ignition systems) are not covered by our warranty. Due to the specific nature of this technology, they are non-refundable. (If you have any questions, please contact us directly).

Technical Details

The only real way to test your CDI box is to swap it out with another known good unit from the same year/make/model. Because of this, we recommend that you rule everything else out before replacing the CDI box.

Our CDI may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This CDI is designed as a direct plug-in replacement and should be used as such.

Part Application/Fitment

Interchanges/Cross References