Arctic Cat TRV400 | TRV450 | TRV500 Generator For Stator For Replaces 3323–200

Brand new generator stator

• Direct replacement to your original unit
• Plug-and-play, direct fit, easy installation.
• Highest grade lamination materials
• Highest grade copper windings, resistant to 200 degrees Celsius.
• Pick up pulsar coil included
• Connector included
• Rubber grommet included
• All products shipped are tested
• One year limited warranty

All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

Used on

• Arctic Cat TRV 400 2010 -2014
• TRV 450 2011 -2012
• TRV 500 2013 -2015
• 400 2013 -2014
• 500 2014 -2014
• 350 2012 -2012
• 366 2008 -2008
• 366 2011 -2011
• 425 2011 2012
• 450 2010 -2012
• 450 2014 -2014

Replaces OEM

• 0802-056
• 3323-200

Technical Details

Dimensions :
Interior diameter : 54mm 
Exterior diameter : 114mm 
Thickness : 18mm 
Length of wires stator to grommet : 140mm 
Length of wires grommet to plug : 320mm 
Length of pickup coil’s wire to grommet : 95mm 

Other specifications :
Number of wires : 7 
Number of plugs : 2 
Number of pins : 7 

Wire to wire resistance :
Alternator : Black between each Black = 0.4ohms +/-20%
Pickup : Blue to Green = 100ohms +/-20%
Position Sensor : White to Yellow = 0.2ohms +/-20%

Before installing your new stator

• Check the AC output of the stator.
• Replace any burned or corroded connectors on stator and regulator/rectifier
• Check and repair any melted wiring.
• Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original. `
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010’’.

Part Application/Fitment