Replacement Stator | Yamaha
Don’t forget to compliment your new Stator with a brand new Cover Gasket: RM08002
Passer til følgende modeller
Erstatter OEM
Tekniske detaljer
Source 1 : Green to Black = 300 ohms+/-20%
Pick up 1 : Red to White = 500 ohms+/-20%
Alternator : White Between each White = 0.9 ohms+/-20%
Alternator : White to Ground = O.L. ON DISPLAY
Before installing your new stator
- Check the AC output of the stator.
- Replace any burned or corroded connectors on stator og regulator/rectifier
- Check og repair any melted wiring.
- Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement og should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010?.
Passer specifikt på disse modeller
| Model |
Delnummer |
År |
Mærke |
Motor |
| YFM 600 Grizzly |
RM01028 |
1998 |
Yamaha |
|
Erstatter følgende originale varenumre
| Varenummer |
Mærke |
| 4WV-85510-00-00 |
Yamaha |
| 4WV-85510-00-00 |
Yamaha |
| AYA4038 |
Arrowhead (Old) |
