Generator Stator For Honda | TRX400 | FA Auto Rancher
- Kvalitetsprodukt
- Uoriginal - men lige så god som original
Passer til følgende modeller
Erstatter OEM
For full application / interchanges listing, please see our part Application / Fitment section below
Tekniske detaljer
Dimensions :
Interior diameter : 35mm
Exterior diameter : 93mm
Thickness : 22mm
Length of wires stator to grommet : 40mm
Length of wires grommet to plug : 95mm & 400mm
Other specifications :
Number of wires : 5
Number of plugs : 1
Number of pins : 5
Wire to wire resistance :
Alternator : Yellow between Each Yellow = 0.4ohms +/-20%
Source : Green to Ground = 0.2ohms +/-20%
Before installing your new stator
- Check the AC output of the stator.
- Replace any burned or corroded connectors on stator and regulator/rectifier
- Check and repair any melted wiring.
- Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010’’.
Passer specifikt på disse modeller
| Model |
Delnummer |
År |
Mærke |
Motor |
| TRX 400 Rancher |
RM01398 |
2004 |
Honda |
|
| TRX 400 Rancher |
RM01398 |
2005 |
Honda |
|
| TRX 400 Rancher |
RM01398 |
2006 |
Honda |
|
| TRX 400 Rancher |
RM01398 |
2007 |
Honda |
|
Erstatter følgende originale varenumre
| Varenummer |
Mærke |
| 31120-HN7-000 |
Honda |
| 31120-HN7-003 |
Honda |
| 31120-HN7-003 |
Honda |
